My Samsung phone no longer loads – where the problem comes from and what to do

In other cases the load problems can be caused by obstructions of sensors or around the load port itself. The latter can be due to the accumulation of dirt directly in the load port, or poorly designed shells and accessories which prevent the normal operation of the recharge.

Your phone no longer loads ? 10 tips to fix it

Load and battery problems can be caused by various factors. In many cases the battery remains healthy and it is not necessary to replace it. Follow these tips to solve your smartphone load problems.

Posted on September 1, 2021 at 1:55 p.m

He can be very frustrating to end up with a smartphone that no longer takes care of. Especially since it is not easy to change the battery yourself, and that sending your smartphone to the after-sales service also means to part with it for a few days.

However, you will see it, the cause of load problems is not, overwhelmingly majority of cases, the one we think. In a third of cases, the concerns simply come from poor manipulation or user inattention – and it is then very simple to find normal operation, checking a few points.

In other cases the load problems can be caused by obstructions of sensors or around the load port itself. The latter can be due to the accumulation of dirt directly in the load port, or poorly designed shells and accessories which prevent the normal operation of the recharge.

Of the Software bugs can also prevent smartphone recharging. It is only after checking all these points, if the problem is still not solved, that it will be necessary to try a battery replacement or repair.

1-The socket is properly connected ?

The first checks to be carried out may seem to flow from source – but do not evacuate them too quickly: to neglect these steps may make you waste a lot of time and to annoy you unnecessarily.

So start by checking your socket, and the wall / multi -pitch socket to which it is connected. Sometimes the plug cards are twisted, or fail to establish satisfactory contact inside the multi -power.

So try to connect the adapter of your smartphone to a wall outlet you have just checked, using a lamp, operation (avoid extensions / multi -ads). Recharge is still not working ? Go to the next stage.

2- Check the cable and your USB charger

In many cases, load problems simply come from a Defective adapter, or defective / worn cables. In particular beware of cheap white marqueers. The latter contain simplified circuits and very low quality components that eventually let go.

Also check the power of the charger: all chargers do not load all smartphones. Especially if we talk about recent smartphones. The chargers display on their 5V / 2A label or lower values ​​can only slowly load relatively old smartphones. If you are in this case, before continuing, Bring another more powerful charger, preferably new.

If the charger seems powerful enough and is recent, try to connect another device to test it. Anything that connects in USB should normally be able to be fed there – if necessary, there is still a problem and it will be necessary to replace the block.

If the charger works but the recharge still does not work, check the cable. To do this, connect it to your smartphone and to one of the USB ports on your computer, which should normally work. If the recharge still doesn’t work, just buy a new cable and try again.

3 – Clean the USB port

If after these checks and after replacing the charger and cable the smartphone still does not take care, You should check if the load port of your smartphone is clean. Indeed, dust and clothing fibers tend to accumulate there, filling this stuffed animal orifice which end up preventing the cable sheet from establishing contact with the cards inside the port.

Few people know it, but It is essential to very regularly check the size of your load port. Depending on the clothes you wear, cleaning may be required between once every two months and once every two weeks. To clean the load port, it’s very simple:

1. Breathe a big blow to give you courage
2. Bring a sight pin
3. Gently remove the dirt, be careful not to damage the contacts*

You will undoubtedly be surprised at the amount of stuffed animals that can accumulate there !

*: If you have an iPhone with Port Lightning Watch out for contacts on the walls. If you have an Android smartphone with USB-C port, fragile contacts are on both sides of the tongue in the middle of the port.

4- Check that the problem does not come from your protective shell or an accessory

There are thousands of manufacturers of protective shells, and All of them do not perfectly respect the technical specificities of your smartphone. As harmless as this accessory may appear, it may, in some cases, that the protective shell blocks sensors, permanently presses one or more buttons of the smartphone, or Created a edge around the load port which prevents the cable from entering it deep enough.

Before taking your smartphone to the repairer – check so if your smartphone still does not take care of once you have removed the shell and all its accessories.

5 – Restart the phone

A software bug can be the source of a load problem. Smartphones are permanently lit devices, so they do not often have the opportunity to restart and therefore relaunch all the services in the background which manage each aspects of your smartphone – including food and load.

This is why before continuing, if the recharge does not work after all these steps, You should try to restart your device. The procedure varies according to your smartphone model:

• On the latest iPhone, just keep the locking button and the volume + button for a few seconds, then make a swipe on the option Turn off. You can then restart your device with prolonged support on the same buttons until the Apple logo appears
• On most Android smartphones: keep the lock button for a few seconds. On the displayed screen, select To restart

6 – Check your battery with an application

Some applications can help you check the health status of your battery, including the number of load cycles and the maximum capacity of the component linked to its wear level. Thanks to this step you will immediately know if a battery repair may or may not have meaning.

We can advise you two applications which display very detailed data on the state of the battery. On Android smartphones, the application Ampere is very complete. On iPhone, we can advise System Status Pro: HW Monitor.

If the battery condition seems satisfactory, but the smartphone still does not take care of, the problem may come from elsewhere. The operating system may no longer know how to correctly assess the battery level level, which can lead you to make a re-calibrage.

It is also possible that all this indicates a deeper problem which is not directly linked to the battery but rather to the load of the load port, or even to the motherboard of the smartphone.

7-Re-caliber the battery

You may not know it but the battery of your smartphone does not know how to say to your device “I am loaded at X %”. Your smartphone calculates the value of the load level by referring to calibration data … which can end up inducing your smartphone in.

However, it is possible to re-caliber the battery. In many cases, this solves bugs linked to autonomy or recharge. Especially if you have found that your smartphone turns suddenly at aberrant load levels such as 40% or 20%. To recalibrate the battery, you must be able to recharge it 100% and let it be completely emptied.

Obviously this step only works if you are touched by “problems” of load rather than total malfunction. If you are in this second case, go directly to steps 8 and 9. If applicable, To recalibrate the battery of an Android smartphone or an iPhone, the procedure is the same ::

1. Load your device 100%
2. Use your device until it is completely unloaded and turns off
3. Recharge it completely up to 100%

Normally at this stage, the battery indications will become normal and autonomy as recharge will have predictable behavior.

8 – Replace or replace the battery

If all these steps do not work, the first advice is to Try a battery replacement. You can carry out the operation yourself thanks to the detailed guides, spare parts and tools of the iFixit site.com. However, we recommend that you call a professional, whether it be the repairer of the area or after -sales service of your smartphone manufacturer.

In general the replacement battery is not an expensive repair. Corner repairers, in particular, will charge you very little, and will only keep your device for a few hours, which will allow you not to be separated from your device for a very long time.

9 – Replace or replace the USB port

The USB port of smartphones is fragile and the manufacturers know it. This is why in many models of recent smartphones the manufacturers have had the good idea to make the USB port modular to facilitate its replacement.

On some smartphone models you can even repair yourself, as soon as you are not afraid to open it. Most proximity repairers can nevertheless save you cold sweats for a low sum.

10 – Have your smartphone diagnose by a professional

Unfortunately, in a few rare cases, replacing the load block, cable and battery will not solve the load problem. This means that your device is struck by a more serious technical problem. Water may for example have caused corrosion on the motherboard of the smartphone. For these more serious problems, we rather recommend that you go if possible by the official after -sales service of your manufacturer.

Support will undoubtedly be of better quality and it is even possible that it saves you a little time. The local repairer may indeed have to order a motherboard or a spare component which will undoubtedly lose a few days.

Have you found the solution of your load problem in this tutorial ? Do not hesitate to share your feedback and your own advice in the comments of this article !

My Samsung phone no longer loads – where the problem comes from and what to do ?

You feel helpless in front of your Samsung which does not recharge ? You are not alone. Millions of people worldwide use these phones and know this frustrating problem. You have disconnected your phone An incalculable number of times, used different chargers and the problem persists. The reasons for this problem vary and the solution you can implement depends on the cause. Here are some useful tips that could suit you.

All about the Samsung brand

Samsung is an international company whose head office is located in Seoul, South Korea. It has more than 200 subsidiaries in the world and is the largest corporate conglomerate in South Korea. The name “Samsung“Means”three stars” in Korean. Samsung’s best known products are smartphones, tablets, MP3 players, televisions and household appliances such as refrigerators and washing machines. Samsung also produces industrial chemicals and operates department stores in South Korea.

All about the problems of Samsung phones and know how to solve them

The most frequent problems in Samsung phones, including the problem of charging refusals ::

1- Heating: This is one of the problems that are widely widespread among smartphones not only Samsung, but also many Chinese and other brands.

2- slowness of performance: As you use your phone, it starts by losing speed and becoming less and slower … that’s normal ! However, this may be due to any other reason such as a damaged battery or an obsolete phone.

3- Distribution of the battery: It is not only Samsung phones, but also many other phones that face this problem. The battery begins to empty quickly after a while and this is linked to the lack of correct use of the phone and its battery.

4- The camera does not work properly: This generally occurs in case of low light and high zoom. In addition to being used for long periods or falling on a hard surface.

5- The phone is no longer responsible: Sometimes the phone no longer takes care and does not work at all, and sometimes it ceases only to load when the phone is on, or it can only work to operate in mid-power. In any case, the problem must be solved as quickly as possible, and here are some of its solutions.

Although you can find all the necessary equipment for the repair From your Samsung phone on the Internet and even on YouTube, if you cannot solve your problem, remember to entrust your Samsung phone to experienced technicians in the Smartphone repair.

The causes of the problem of charging refusals

The cause of the problem can be a defective battery. If the phone does not take care, the only correct solution is to replace it with a new. Unfortunately, in addition to the battery, there are other reasons why Samsung constantly refuses to take care of. See what these reasons are and how to resolve them:

• Software failure
• The firmware can be damaged. Many reasons: from simple overheating of the smartphone to serious malfunctions in the operation of the device. If you have flashed your smartphone with an incorrect version of the firmware or used third -party software that does not meet the requirements of your device, you will have this problem.
• The USB cable connecting the gadget to the charger has broken. One of its ends or both may have been damaged;
• Mechanical damage to the device. It can be scratches on its housing or damage to lower contacts by which the device is powered;
• MALAPER OF THE MANDER. It is wise to ensure that it is working properly and that you use the original accessory;
• There was an error in the overclocking of the processor of your smartphone. Too high frequency parameters precisely cause your device loading problems.

How to resolve the problem of charging your Samsung phone ?

If you have a Samsung phone, here are some measures to take if your device does not take care of.

Defective charger

First, check that the charger is working properly. Try another charger that you know, works with another device. If the second charger does not work either, it is likely that the problem is at the level of the plug and not the charger. If only one of the chargers works, there may be a problem with the other charger.

Port cleaning

Sometimes dust and small particles can be housed in your load port and prevent it from working properly. To clean your load port, turn off your phone, then use a toothpick or a small piece of paper to remove the debris that could block the port. Once you have cleaned the load port, try recharging your phone. If this does not solve your problem, there may be another problem with your device.

Defective battery

If you have tried to use different chargers and clean the load port and your phone still does not answer when you connect it to load it (the battery icon is not displayed), this may mean that your battery presents a problem. Simply replace the batteries and your problem will be solved.