The meaning of the housing lights have sfr

If you do not have the installation CD of your box, go to step 3.

How to connect and install my mini box have ?

If you do not have the installation CD of your box, go to step 3.

I let myself be guided

• Select your box model.
• Follow the branching steps of the housing described step by step.

I plug the ethernet cable

Connect the Ethernet cable (with gray tips):

• on the ETH socket of your mini-box have,
• On the gray fiber socket of your box.

I connect my mini-box have on the electrical outlet

• Connect your mini-box have to the electrical outlet, thanks to the supply cable supplied.
• Finally, position the button On/off on ” WE “.

I end the connection of my equipment

If it is not done yet :

• Connect your fiber box to an electrical outlet,
• Turn on your box: the lights around the SFR button should light up.
• Enter the password via the local interface of your box (this step is only necessary.

If this is not yet the case, connect your computer to your box.

I access the management interface

On your computer:

• launch your browser,
• Enter the URL address bar in the address bar: http: // 192.168.1.1/Fiber/Config

An information page on your box is displayed.

I launch the connection of my box

• Press the button for about 5 seconds SFR from your box until it flashes.
• On the web page, click the button Continue.

I enter my PIN code

In the tab Network, Then “Wan” ::

• Complete the field ” Client reference »With the password that was communicated to you by SFR customer service by mail and SMS,
• Respect the capital letters,
• Click on the button To validate.

To note. After 3 erroneous attempts, the page blocks ! In this case, contact SFR customer service.

I remove the protections

• The black plug of the mini-box have,
• The transparent despair of the optical connector.

I plug the fiber optics

• Insert the tip of fiber optics, coming from your wall optical socket, in the Pon socket until he heard two locking “clicks”.
• Make sure the tip is well blocked.

I am connected !

Observe the lights of your mini-box carefully have.

If everything is in order:

• All the lights are green,
• MGNT, Pon and EQPT lights are fixed,
• The LAN lighter flashes.

And now, my mini-box has is installed and operational.

I want to solve an operating problem

No seer lights up

You have followed all the steps of installation, and yet No seer is turned on ::

• Check that the mini-box switch is on ” WE “,
• Disconnect and reconnect your power cable.

The LAN light is turned off

You have followed all the stages of installations, and yet The LAN light is off and all the others are on ::

• Put the mini-box switch have on “Off”,
• Disconnect and correctly reconnect the gray ethernet cable that connects your mini have to your box,
• Put the mini-box switch have on ” WE »» .

If it still doesn’t work, change the gray ethernet cable.

The pon light is red

You have followed all the stages of installations, and yet The pon light is red ::

• Put the mini-box switch have on “Off”,
• Reconnect the cable of the fiber (green) a click must be understood,
• Put the mini-box switch have on ” WE “.

I can’t solve my problem

Despite your tests, it still doesn’t work ?

The meaning of the housing lights have sfr

The EQPT light indicates to you if your case is properly powered.

• Extinct : The mini box have been plugged in or not turned on.
• Lit in green: The mini box has is properly fed.
• Lit in red: The mini case is out of service.

To change equipment, contact SFR customer service or an advisor to the SFR technical cat.

Mini box have: the ponus indicator

The Pon light indicates to you if your case is properly connected to the fiber network.

• Flashing in red/green or off:: Your mini box have cannot synchronize. The fiber can be badly fired.
• Turned upon:: The mini case is synchronized with the network.
• On red in red:: The software of the mini box is obsolete Or There is an optical fiber cable problem (disconnected fiber, too curved cable or other).

If the light is not green:

1. Push the button On/off To turn off your case.
2. Make sure the fiber optic cable is well inserted in your wall optical and it is not damaged.
3. Disconnect and reconnect the green fiber optical tip in the mini case have.
4. Rollume your mini case have.

If, despite this manipulation, the 4 lights of the mini box have are not turned on properly, contact SFR customer service or an advisor to the SFR technical cat to change the equipment.