Connected thermostat for electric radiator

To optimize the performance of your radiators, you can install behind heat reflective films. They will redirect heat to the center of the room to maximize comfort. Depending on the model, the reflective panel allows achieve up to 7.5 % heating savings.

Connected thermostat for electric radiator

Installing a connected thermostat for electric radiators allows you to save energy. But when you equip yourself, not always easy to make the right choice. Which connected thermostat to choose ? Here is a selection of 5 models to transform your simple radiators into connected radiators !

1. The thermostat Electric radiator Radiator Pilot of Voltalis

Energy saving box, the Voltalis connected thermostat ensures the control of electric radiators remotely. This connected thermostat is free. Indeed, it is a residential erasure box.

In the event of a rush of national consumption, Voltalis receives a signal from RTE and punctually cuts the electric housing radiators. The cut is too short to make you lose in temperature. On the other hand, all year round, you can TO DO up to 15 % energy savings.

Have a connected thermostat installed to improve your comfort and save money !

2. The Heatzy connected thermostat

The Heatzy connected thermostat for electric radiators is an intelligent heating programmer. Pototable in wifi via a mobile application, thanks to the Heatzy thermostat, users can define heating time slots and Adjust the temperature of electric radiators Remote from their smartphone.

In addition, the Heatzy system can Learn the preferences and user heating habits, To automatically refine temperature settings.

3. Thomson Cali-P

Connected thermostat for electric heating, the Cali-P Thomson is designed for Check electric radiators using a pilot wire. Compatible with the “Thomson at Home” mobile application, it allows a consumer to program the temperature of the room room by room from smartphone or tablet.

4. Konyks Ecosy

Designed in France and easy to install, the pilot wire thermostat for electric radiator Konyks Ecosy is compatible with vocal assistants like Alexa and Google Home. It allows precise control of radiators, inducing on a daily basis savings on the heating bill.

5. Wiser by Schneider Electric

Wiser is a home automation solution proposed by Schneider Electric. It allows users to control and manage various stations of energy consumption like lighting, heating and motorized shutters. This solution will therefore Beyond the simple regulation of radiators.

Habitatpresto advice:
Install heat reflective films !

To optimize the performance of your radiators, you can install behind heat reflective films. They will redirect heat to the center of the room to maximize comfort. Depending on the model, the reflective panel allows achieve up to 7.5 % heating savings.

Lexicon on the connected thermostat

• Pilot wire : An additional thread on electric radiators which allows us to transmit orders (comfort, eco, out of frost. ) from a centralized thermostat or programmer.
• 6 orders : Typical commands transmitted via the pilot wire, including: comfort, comfort -1 ° C, comfort -2 ° C, eco, out of frost and stop.
• Inertia : Radiator capacity to continue to diffuse heat after stopping electrical resistance. Inertia radiators often use materials such as melting or ceramics.
• Electronic thermostat : Regulation device that adjusts the temperature by modulating the power of the electric radiator.
• Open window detection : Functionality which detects a sudden drop in temperature, as when opening a window, and puts the radiator in economy or temporary stop mode.
• Programming range : Predefined period during which the radiator modifies its operation, for example, by reducing the temperature at night.
• Radiator radiator : Type of electric radiator which heats mainly by radiation, offering a feeling of heat similar to that of the sun.
• Remote control : Capacity to control and adjust the thermostat of the electric radiator via a smartphone application or another device connected remotely.

Connected thermostat for electric radiator

For houses equipped with a heating installation based on electric radiators, it is also possible to benefit from the many advantages offered by using a connected thermostat. Indeed and for several years now, all of the electric radiators have integrated the “pilot wire” technology that has become standard of the market for their control by external equipment. This technology then makes it possible to control the heating by sending it the mode in which it must operate: comfort, eco, off-cream or stop. In addition, if the pilot wires of each of the radiators are interconnected, the command can therefore be centralized.

Thanks to this simple principle, the Ween connected thermostat can therefore help you take control of your heating installation. In addition to that, the thermostat intelligently uses fashion changes to allow you to precisely adjust the temperature of your accommodation to the nearest degree without having to laboriously modify the instructions of each radiator.

Replacement of a pilot wire plant

If you already have a centralized pilot wire command, the Ween thermostat replaces it very simply. If the power station has other functions than heating management, such as piloting the water heater for example, it will be left in operation, in order to let it manage its annexed tasks (water heater. )).

The operating mode is always the same: • Take the phase (named PH or L) to the central level to send it to the Com1 terminal of the Ween relay; • Disconnect the pilot wire (s) of the power station to send them to the relay No2 terminal.

If you already have a centralized pilot wire command, the Ween thermostat replaces it very simply. If the power station has other functions than heating management, such as piloting the water heater for example, it will be left in operation, in order to let it manage its annexed tasks (water heater. )).

The operating mode is always the same: • Take the phase (named PH or L) to the central level to send it to the Com1 terminal of the Ween relay; • Disconnect the pilot wire (s) of the power station to send them to the relay No2 terminal.

Depending on the equipment to be replaced, it can be in one or two blocks. In the first case, a “thermostat” in your home directly controls the pilot wires (threads of 1.5mm²). The installation and connection of the Ween relay is to be done in this place. In the second case, a “thermostat” in your home is connected by small wires to a box located in the electrical panel. It is the latter who controls the pilot wires. The installation of the relay is to be done there.

If the principle obviously always remains the same regardless of your case, the following document presents the detailed connections of several market products:

• Deltadore Calybox
• Deltadore Calybox 1200WT
• Deltadore Driver / GP500
• Deltadore MicroDriver GP 26/36
• Deltadore MicroDriver XH
• Deltadore Starbox
• Flash Piloteco HPX1 / JTX
• WK32XB flash
• HAGER 4911X
• Merlin Gerin Fip’Clic / FPIX / SFP
• Schneider Electric Fip’Clic / FPIX / SFP