The technical characteristics of the very high speed WiFi AC SFR modem

Flash during the configuration file acquisition phase.

The characteristics of the very high speed modem (THD) of SFR

The very high speed modem gives you access to the following services:

• Very high speed up to 100 Mbps,
• unlimited telephony towards fixed in France and towards more than 100 destinations.

The very high speed modem has:

• 4 Ports RJ 45 Gigabit Ethernet (to connect computers, a game console etc.))
• 1 USB ports (to connect a printer, a hard drive, a USB key)
• 1 RJ 11 port for telephony
• 1 cable input
• 1 integrated wifi antenna (supporting standards 802.11/g/n)
• 1 WPS button (simplified wi-fi pairing)
• 1 WiFi/Stby button
• 1 on/stop switch
• 1 plug to connect the power supply
• 1 reset button

Front front of the very high speed modem

HAS. USB port

Allows you to read multimedia content from a key or hard drive connected to this port.

B. WPS button (simplified wifi pairing)

Flash during the pairing phase.

It allows you to activate the WPS (WiFi Protected Setup) function which allows you to simply connect equipment compatible with the WiFi network of your SFR MODEM THD from SFR.

VS. WiFi/Stby button

Activation/deactivation of WiFi (short support of 3 seconds)

Break up the modem (10 seconds long support).

The button is turned on when the modem is in Stby mode.

D. LED Power (Food)

Fixed on when the modem is powered.

E. LED Synchronization Descendants (DOWNSTREAM)

Flash during the hook phase. Fixed as soon as the descending tracks are acquired.

F. LED Synchronization Rooms Montes (upstream)

Flash during the hook phase.

Fixed as soon as the rising tracks are acquired.

G. LED online (Internet access)

Flash during the configuration file acquisition phase.

Fixed when access to surfing on the Internet is now possible.

H. Wi-Fi LED (Internet Access)

Fixed and flashes when there is internet traffic in wifi.

Extinguished when wifi is disabled.

I. LED Telephone

Flash during the configuration file acquisition phase.

Fixed after the initialization phase and when the phone is hung up .

Flash during a call.

J. LED messaging

Default. Fixed on when a message is present on the answering machine.

The technical characteristics of the very high speed WiFi AC SFR modem

The very high speed WiFi AC Modem of SFR SAGEMCOM F@St 3686 acts as a modem-feeder, for very high speed internet access and unlimited telephony. It allows you to reach a speed up to 1 Gbps maximum depending on the eligibility of your home.

The very high speed AC modem gives you access to the following services:

• Very high speed up to 1 Gbps,
• unlimited telephony towards fixed in France and towards more than 100 destinations.

The very high speed WiFi AC modem has:

• 4 Ports RJ 45 Gigabit Ethernet (to connect computers, a game console etc.)),
• 1 USB ports (to connect a printer, a hard drive, a USB key),
• 1 RJ 11 port for telephony,
• 1 cable input,
• 1 integrated wifi antenna (supporting standards 802.11N/AC),
• 1 WPS button (simplified wifi pairing),
• 1 WiFi/Stby button,
• 1 on/stop switch,
• 1 plug to connect the power supply,
• 1 reset button.

Did these informations help you ?

On this subject, users also consulted:

• How to connect and install my very high speed AC SFR modem ?
• What if I don’t have an internet connection with my very high speed WiFi AC SFR modem ?
• How to identify the devices connected to my very high speed SFR modem ?

The SFR & me app,
always by your side

Scan the QR code
For Download the SFR & Moi application

How to connect and install my very high speed modem (THD) of SFR ?

Screw the other end of the coaxial cable at the entrance ” Cable “ of your modem.

To know !

To know !

In the event of a double output wall outlet (“TV” and “data”), connect your equipment to the socket “Data”.

I plug the modem

Connect the AC adapter (accessory n ° 3) to your modem and then to your sector outlet.

Position the switch ” On Off “ modem on “I”.

I wait for possible update time

Wait 1 minute for the lights to stop flashing.

During the first installation, after the indicator “Online” be fixed for the first time, it is possible that the lights “Synchronizations/online” And “Tel/ message” start to flash together alternately: this means that a software update is in progress (2 update cycles may be necessary).

Do not disconnect your modem during this phase, which can last between 5 and 15 minutes.

Once the updates have been carried out, your modem will resume its start -up phase and run its normal installation cycle.

I connect the modem to my computer via an ethernet cable

If you have chosen a cable connection, connect the Ethernet cord (accessory n ° 4) between the Giga Ethernet port of your modem and the Ethernet port on your computer.

Warning light Giga Ethernet connection lights up whatever the Ethernet port chosen (ETH 1, 2, 3, 4).

I connect the modem to my computer via a wireless connection (WiFi)

If you have chosen a wireless connection from the list of WiFi networks that appear, select the name of your Wi-Fi network (SSID).

The SSID is registered on the label stuck under the modem.

Example : Xxxx-abcd, where “xxxx” corresponding to the name of your operator and “ABCD” to the last 4 characters that appear on the label of your modem.

To access this network, you must enter the WiFi security key (WPA/PSK – WPA2/PSK) while respecting the breakage (letter in capital letters) also indicated on the label.

This key protects access to your wireless network. Only those who have it can connect to the Internet via your modem.